Skip to main content

ÍS
EN

Forsíða

Forsíða

Halldór Pálsson - Professor

Default image of a person

–

School of Engineering and Natural Sciences

Halldór Pálsson

Professor

Location
VR-2 / V02-244
Phone
525 - 4184
Email
halldorp [at] hi.is

Unit
Faculty of Industrial Engineering, Mechanical Engineering and Computer Science
Website
http://www.mendeley.com/profiles/halldor-palsson2/

Published works

2023

Fast and robust femur segmentation from computed tomography images for patient-specific hip fracture risk screeningComputer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization

2020

Life cycle assessment of a geothermal combined heat and power plant based on high temperature utilizationGeothermics
High-Temperature Geothermal Utilization in the Context of European Energy Policy—Implications and LimitationsEnergies

2019

Biofidelic finite element models for accurately classifying hip fracture in a retrospective clinical study of elderly women from the AGES Reykjavik cohortBone

2018

Mesh Twisting Technique for Swirl Induced Laminar Flow Used to Determine a Desired Blade ShapeApplied Sciences
On the Failure Initiation in the Proximal Human Femur Under Simulated Sideways FallAnnals of Biomedical Engineering
Material mapping strategy to improve the predicted response of the proximal femur to a sideways fall impactJournal of the Mechanical Behavior of Biomedical Materials

2017

Modelling and analysis of a horizontal direct chill casting processMinerals, Metals and Materials Series
Machine learning for creation of generalized lumped parameter tank models of low temperature geothermal reservoir systemsGeothermics
Fouling Detection in a Parallel Flow Heat Exchanger via a Roesser Model Identification ProcedureIFAC-PapersOnLine

2016

Morphology based anisotropic finite element models of the proximal femur validated with experimental dataMedical Engineering and Physics
Heat exchanger identification by using iterative fuzzy observersHeat and Mass Transfer/Waerme- und Stoffuebertragung
Online fouling detection of domestic hot water heat exchangersHeat Transfer Engineering
Structural modeling of the casings in the IDDP-1 well: Load history analysisGeothermics
Fundamental mode of freely decaying laminar swirling flowsApplied Mathematical Modelling
Complexity analysis of generalized tank modelsTransactions - Geothermal Resources Council
The influence of the modulus-density relationship and the material mapping method on the simulated mechanical response of the proximal femur in side-ways fall loading configurationMedical Engineering and Physics
Interactive graph-cut segmentation for fast creation of finite element models from clinical ct data for hip fracture predictionComputer Methods in Biomechanics and Biomedical Engineering

2015

Design of a device to induce swirling flow in pipes: A rational approachComptes Rendus - Mecanique
Mixed integer optimization model for utilizing a geothermal reservoirGeothermics
Calculation of relative permeabilities of water and steam from laboratory measurementsGeothermics
Life cycle inventory of a flash geothermal combined heat and power plant located in IcelandInternational Journal of Life Cycle Assessment
Structural modeling of the casings in high temperature geothermal wellsGeothermics
Calculation of relative permeabilities from field data and comparison to laboratory measurementsGeothermics

2014

Utilization of the chloride bearing, superheated steam from IDDP-1Geothermics

2013

Experimental and CFD simulation of heat efficiency improvement ingeothermal spasEnergy
Inducing swirling flow in heat exchanger pipes for reduced fouling rateHeat Transfer Engineering

2012

Temperature fluctuations and quality deterioration of chilled cod (Gadus morhua) fillets packaged in different boxes stored on pallets under dynamic temperature conditionsInternational Journal of Refrigeration
Numerical modelling of temperature fluctuations of chilled and superchilled cod fillets packaged in expanded polystyrene boxes stored on pallets under dynamic temperature conditionsJournal of Food Engineering
Waste-heat for pre-heating internal combustion enginesASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Numerical modelling of temperature fluctuations in superchilled fish loins packaged in expanded polystyrene and stored at dynamic temperature conditionsInternational Journal of Refrigeration

2011

Continuous-time linear parameter-varying identification of a cross flow heat exchanger: A local approachIEEE Transactions on Control Systems Technology
Methodology for pipeline route selection using the NSGA II and distance transform algorithmsProceedings of the ASME Design Engineering Technical Conference
Experimental and numerical modelling comparison of thermal performance of expanded polystyrene and corrugated plastic packaging for fresh fishInternational Journal of Refrigeration
Numerical heat transfer modelling for improving thermal protection of fish packaging6th International CIGR Technical Symposium - Towards a Sustainable Food Chain: Food Process, Bioprocessing and Food Quality Management

2010

Analysis of heat transfer in heat exchangers by using the NTU method and empirical relations12th International Symposium on District Heating and Cooling
LCA of combined heat and power production at hellisheidi geothermal power plant with focus on primary energy efficiency12th International Symposium on District Heating and Cooling
Waste heat utilization from a submerged arc furnace producing ferrosiliconProceedings of the 12th International Ferroalloys Congress: Sustainable Future
Heat recovery from the exhaust gas of aluminum reduction cellsTMS Light Metals
Assessing relative permeabilities of two phase flows of water and steam in geothermal reservoirs: State of the art relationsTransactions - Geothermal Resources Council
Detection of fouling in a cross-flow heat exchanger using a neural network based techniqueInternational Journal of Thermal Sciences

2009

Risk of failure during gait for direct skeletal attachment of a femoral prosthesis: A finite element studyMedical Engineering and Physics
Influence of parameter variations on the braking torque of a magnetorheological prosthetic kneeJournal of Intelligent Material Systems and Structures
Thermal performance of corrugated plastic boxes and expanded polystyrene boxes

2008

A modified method for assigning material properties to FE models of bonesMedical Engineering and Physics

2007

Electrode erosion in submerged arc furnacesInnovations In The Ferro Alloy Industry - Proceedings of the XI International Conference on Innovations in the Ferro Alloy Industry, Infacon XI
Thermal effects on carbon based electrodes close to a high current electric arcInnovations In The Ferro Alloy Industry - Proceedings of the XI International Conference on Innovations in the Ferro Alloy Industry, Infacon XI

2006

Design of a magnetorheological prosthetic kneeProceedings of NordDesign 2006 Conference
Electrode erosion due to high-current electric arcs in silicon and ferrosilicon furnacesSteel Research International

2002

Aggregated dynamic simulation model of district heating networksEnergy Conversion and Management

1998

Probabilistic production simulation including combined heat and power plantsElectric Power Systems Research

Keywords for Specialisation:

Fluid mechanics

Mathematical modeling